D-Link Web Smart DES-3252P Install Manual page 165

•
Remove — Removes a specific ARP entry. The possible field values are:
–
Checked — Removes the selected ARP entries.
–
Unchecked — Maintains the current ARP entries.
2. Define the ARP Entry Age Out and Clear ARP Table Entries fields.
3. Click . The ARP parameters are defined, and the device is updated.
To create a new ARP entry:
1. Click Basic Setup > IP Configuration > IP Addressing > ARP. The ARP Page opens.
2. Click . The Add ARP Settings Page opens:
Figure 105:Add ARP Settings Page
3. Define the Interface, IP Address, and MAC Address fields.
4. Click . The ARP interface is added, and the device is updated.
Page 165
Configuring IP Information
Configuring ARP