Table of Contents
Advertisement
Figure 10: Mounting Device in a Rack
5.
Secure the unit to the rack with the rack screws (not provided). Fasten the lower pair of screws before the
upper pair of screws. This ensures that the weight of the unit is evenly distributed during installation. Ensure
that the ventilation holes are not obstructed.
Note
To maximize switch performance, clean the fan regularly.
Optional Redundant Power Supply
The switch supports an optional Redundant Power Supply (RPS), that can supply power
to the switch in the event of failure of the internal power supply. The DES-3252P
supports only the DPS-600 device.
Caution
The optional RPS is not hot swappable. Do not attempt to replace it while the system is in operation.
Page 20
Mounting Device
Installing the Device
Hide quick links:
Advertisement
Table of Contents
