Table of Contents
Advertisement
DES-3228PA Embedded Web System User Guide
Configuring DSCP Rewrite
The DSCP Rewrite Summary page allows network managers to assign new DSCP values to incoming packets. To
enable DSCP Rewrite:
1.
Click Basic Setup > Quality of Service > Basic Mode > DSCP Rewrite. The DSCP Rewrite Page opens:
Figure 112: DSCP Rewrite Page
The DSCP Rewrite Page contains the following:
•
DSCP In — Displays the incoming packet's DSCP value.
•
Queue — Specifies the traffic forwarding queue to which the DSCP priority is mapped. Eight traffic priority
queues are supported.
2.
Define the DSCP In Queue field.
3.
Click
. The DSCP values is reassigned, and the device is updated.
Page 177
Advertisement
Table of Contents
