•
Falling Event — Displays the mechanism in which the alarms are reported.
•
Startup Alarm — Displays the trigger that activates the alarm generation. Rising is defined by crossing the
threshold from a low-value threshold to a higher-value threshold.
•
Interval — Defines the alarm interval time in seconds.
•
Owner — Displays the device or user that defined the alarm.
•
Remove — Removes the RMON Alarms Table entry.
2.
Click
. The Add An Alarm Entry Page opens:
Figure 178:Add An Alarm Entry Page
3.
Define the Interface, Counter Name, Sample Type, Rising Threshold, Rising Event, Falling Threshold, Falling
Event, Startup Alarm, Interval, and Owner fields.
4.
Click
. The RMON alarm is added, and the device is updated.
Page 256
Viewing Statistics
Managing RMON Statistics
Need help?
Do you have a question about the Web Smart DES-3252P and is the answer not in the manual?