Defining Snmp Notification Recipients - D-Link Web Smart DES-3252P Install Manual

Defining SNMP Notification Recipients

The SNMP Notification Receiver Page contains information for defining filters that determine whether traps are
sent to specific users, and the trap type sent. SNMP notification filters provide the following services:
•
Identifying Management Trap Targets
•
Trap Filtering
•
Selecting Trap Generation Parameters
•
Providing Access Control Checks
To define SNMP notification filters:
1. Click System > SNMP > Notification > Notification Receiver. The SNMP Notification Receiver Page
opens:
Figure 156:SNMP Notification Receiver Page
The SNMP Notification Receiver Page is divided into the following tables:
•
SNMPv1,2c Notification Recipient
•
SNMPv3 Notification Recipient
SNMPv1,2c Notification Recipient
The SNMP v1, v2c Recipient table contains the following fields:
•
Recipients IP — Displays the IP address to which the traps are sent.
•
Notification Type — Displays the notification sent. The possible field values are:
–
Trap — Indicates traps are sent.
–
Inform — Indicates informs are sent.
•
Community String — Displays the community string of the trap manager.
•
Notification Version — Displays the trap type. The possible field values are:
–
SNMP V1 — Indicates that SNMP Version 1 traps are sent.
–
SNMP V2c — Indicates that SNMP Version 2 traps are sent.
•
UDP Port — Displays the UDP port used to send notifications. The default is 162.
Page 227
Configuring SNMP
Configuring SNMP Notifications