D-Link Web Smart DES-3252P Install Manual page 10

Figure 3: Inserting a GBIC into the Device
RS-232 Console Port
The RS-232 port is an asynchronous serial console port supporting the RS-232 electrical specification. The port is
used to connect the device to a console managing the device. This interface configuration is as follows:
•
Eight data bits.
•
One stop bit.
•
No parity.
•
Baud rate is 9600 (default). The range is from 9600 to 115200 bps.
•
Console speeds of 57600 and 115200.
Page 10
Device Description
Ports Description