Defining Snmp Notification Filters - D-Link Web Smart DES-3252P Install Manual

Defining SNMP Notification Filters

The SNMP Notification Filter Page permits filtering traps based on OIDs. Each OID is linked to a device feature or
a portion of a feature. The SNMP Notification Filter Page also allows network managers to filter notifications. To
define SNMP notification filters:
1. Click System > SNMP > Notification > Notification Filter. The SNMP Notification Filter Page opens:
Figure 154:SNMP Notification Filter Page
The SNMP Notification Filter Page contains the following fields:
•
Filter Name — Contains a list of user-defined notification filters.
•
Object Identifier Subtree — Displays the OID for which notifications are sent or blocked. If a filter is
attached to an OID, traps or informs are generated and sent to the trap recipients. OIDs are selected from
either the Select from field or the Object ID field.
•
Filter Type — Indicates whether to send traps or informs relating to the selected OID.
–
Excluded — Does not send traps or informs.
–
Included — Sends traps or informs.
•
Remove — Deletes the SNMP notification filters.
–
Checked — Deletes the selected filter.
–
Unchecked — Maintains the list of filters.
2. Click . The Add SNMP Notification Filter Page opens:
Page 225
Configuring SNMP
Configuring SNMP Notifications