Defining Multicast Forward All Settings - D-Link Web Smart DES-3252P Install Manual

Defining Multicast Forward All Settings

The Multicast Forward All Page contains fields for attaching ports or LAGs to a device that is attached to a neigh-
boring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are forwarded to the appropri-
ate port or VLAN. Unless LAGs are defined, only a Multicast Forward All table displays. To define Multicast
forward all settings:
1. Click Advanced Setup > Multicast Support > Bridge Multicast > Multicast Forward All. The Multicast
Forward All Page opens:
Figure 114: Multicast Forward All Page
The Multicast Forward All Page contains the following fields:
•
VLAN ID — DIsplays the VLAN for which Multicast parameters are displayed.
•
Ports — Ports that can be added to a Multicast service.
The are the Multicast settings which can be assigned to ports in the Multicast Forward All Page.
•
D — Attaches the port to the Multicast router or switch as a dynamic port.
•
S — Attaches the port to the Multicast router or switch as a static port.
•
F — Forbidden.
•
N — None
Configuring Multicast Forwarding
Page 175
Defining Multicast Bridging Groups