D-Link Web Smart DES-3252P Install Manual page 110

•
Interface — Defines the interface on which the access profile is defined. The possible field values are:
–
Port — Specifies the port on which the access profile is defined.
–
LAG — Specifies the LAG on which the access profile is defined.
–
VLAN — Specifies the VLAN on which the access profile is defined.
•
Source IP Address — Defines the interface source IP address to which the access profile applies. The
Source IP Address field is valid for a subnetwork.
•
Network Mask — Specifies the source IP address subnetwork mask.
•
Prefix Length — Specifies the number of bits in IP address prefix. [bits of IP address vs. bits of Prefix of IP
address].
•
Action — Indicates if management access is permitted or denied to the interface. The possible field values
are:
–
Permit - Permits access to the specified interface.
–
Deny - Denies access to the specified interface.
3. Define the Access Profile Name, Rule Priority, Management Method, Interface, Source IP Address, Network
Mask or Prefix Length, and Action fields.
4. Click . The access profile is created, and the device is updated.
Page 110
Configuring Device Security
Configuring Management Security