Resetting The Device - D-Link Web Smart DES-3252P Install Manual

Resetting the Device

The Reset page enables resetting the device from a remote location.
Note
To prevent the current configuration from being lost, save all changes from the running configuration file
to the startup configuration file before resetting the device. For instructions, see Copying Files.
To reset the device:
1. Click System > General > Reset. The Reset page opens.
Figure 17: Reset Page
2. Click
Figure 18: Reset Confirmation Message
3. Click
4. Enter a user name and password to reconnect to the web Interface.
. A confirmation message is displayed.
. The device is reset, and a prompt for a user name and password is displayed.
Page 46
Getting Started
Resetting the Device