Defining Snmp Group Profiles - D-Link Web Smart DES-3252P Install Manual

Defining SNMP Group Profiles

The SNMP Group Profile Page provides information for creating SNMP groups, and assigning SNMP access con-
trol privileges to SNMP groups. Groups allow network managers to assign access rights to specific device fea-
tures, or feature aspects. To define an SNMP group:
1. Click System > SNMP > Security > Group Profile. The SNMP Group Profile Page opens:
Figure 144:SNMP Group Profile Page
The SNMP Group Profile Page contains the following fields:
•
Group Name — Displays the user-defined group to which access control rules are applied. The field range is
up to 30 characters.
•
Security Model — Defines the SNMP version attached to the group. The possible field values are:
–
SNMPv1 — SNMPv1 is defined for the group.
–
SNMPv2c — SNMPv2c is defined for the group.
–
SNMPv3 — SNMPv3 is defined for the group.
•
Security Level — Defines the security level attached to the group. Security levels apply to SNMPv3 only.
The possible field values are:
–
No Authentication — Indicates that neither the Authentication nor the Privacy security levels are
assigned to the group.
–
Authentication — Authenticates SNMP messages, and ensures that the SNMP message's origin is
authenticated.
–
Privacy — Encrypts SNMP messages.
•
Operation — Defines the group access rights. The possible field values are:
–
Read — Management access is restricted to read-only, and changes cannot be made to the assigned
SNMP view.
–
Write — Management access is read-write and changes can be made to the assigned SNMP view.
–
Notify — Sends traps for the assigned SNMP view.
•
Remove — Removes SNMP groups. The possible field values are:
Page 214
Configuring SNMP
Configuring SNMP Security