Uploading System Files - D-Link Web Smart DES-3252P Install Manual

Layer 2 switch managed 48-port 10/100base-tx poe with gigabit uplinks
Hide thumbs Also See for Web Smart DES-3252P:
Table of Contents

Advertisement

Uploading System Files

The File Upload Page contains fields for uploading the software from the device to the TFTP server. To upload
system files:
1.
Click System > File Management > File Upload. The File Upload Page opens:
Figure 119: File Upload Page
The File Upload Page is divided into the following sections:
Upload Type
Software Image Upload
Configuration Upload
Upload Type
The Upload Type section contains the following fields:
Firmware Upload — Specifies that the software image file is uploaded. If Firmware Upload is selected, the
Configuration Upload fields are grayed out.
Configuration Upload — Specifies that the Configuration file is uploaded. If Configuration Upload is
selected, the Software Image Upload fields are grayed out.
Software Image Upload
The Software Image Upload section contains the following fields:
TFTP Server IP Address — Specifies the TFTP Server IP Address to which the Software Image is uploaded.
Destination File Name — Specifies the software image file path to which the file is uploaded.
Page 183
Managing System Files
Uploading System Files

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents