Defining Line Passwords - D-Link Web Smart DES-3252P Install Manual

Defining Line Passwords

Network administrators can define line passwords for Console, Telnet, and SSH in the Line Password Page. For
line passwords, no level should be defined. The device can be accessed using the following methods:
To define line passwords:
1. Click System > Management Security > Passwords > Line Password. The Line Password Page opens:
Figure 78: Line Password Page
The Line Password Page contains the following fields:
•
Console Line Password — Defines the line password for accessing the device via a Console session. Pass-
words can contain a maximum of 159 characters.
•
Telnet Line Password — Defines the line password for accessing the device via a Telnet session. Pass-
words can contain a maximum of 159 characters.
•
Secure Telnet Line Password — Defines the line password for accessing the device via a secure Telnet
session. Passwords can contain a maximum of 159 characters.
•
Confirm Password — Confirms the new line password. The password appears in the ***** format.
2. Define the Console Line Password, Telnet Line Password, and Secure Telnet Line Password fields.
3. Redefine the Confirm Password field for each of the passwords defined in the previous steps to verify the
passwords.
4. Click . The line passwords are saved, and the device is updated.
Page 129
Configuring Device Security
Configuring Management Security