D-Link Web Smart DES-3252P Install Manual page 140

•
Status — Indicates the host status. If there is an asterisk (*), the port is either not linked or is down. The pos-
sible field values are:
–
Unauthorized — Indicates that either the port control is Force Unauthorized and the port link is down, or
the port control is Auto but a client has not been authenticated via the port.
–
Not in Auto Mode — Indicates that the port control is Forced Authorized, and clients have full port
access.
–
Single-host Lock — Indicates that the port control is Auto and a single client has been authenticated via
the port.
–
No Single Host — Indicates that Multiple Host is enabled.
•
Number of Violations — Indicates the number of packets that arrived on the interface in single-host mode,
from a host whose MAC address is not the supplicant MAC address.
2. Click . The Multiple Host Settings Page opens:
Figure 84: Multiple Host Settings Page
3. Modify the Port, Enable Multiple Hosts, Action on Violation, Enable Traps, and Trap Frequency fields.
4. Click . The multiple host settings are modified, and the device is updated.
Page 140
Configuring Device Security
Configuring Network Security