Table of Contents
Advertisement
Rack Installation
The device can be mounted in an EIA standard-sized, 19-inch rack, which can be placed in a wiring closet with
other equipment. To install, the device the mounting brackets must first be attached on the devices's sides.
Notes
•
Disconnect all cables from the unit before mounting the device in a rack or cabinet.
•
When mounting multiple devices into a rack, mount the devices from the bottom up.
To install the device in a rack, perform the following:
1.
Place the supplied rack-mounting bracket on one side of the device ensuring the mounting holes on the
device line up to the mounting holes on the rack mounting bracket. The following figure illustrates where to
mount the brackets.
Figure 9:
Attaching the Mounting Brackets
2.
Insert the supplied screws into the rack mounting holes and tighten with a screwdriver.
3.
Repeat the process for the rack-mounting bracket on the other side of the device.
4.
Insert the unit into the 19-inch rack ensuring the rack-mounting holes on the device line up to the mounting
hole on the rack. The following figure illustrates lining up and mounting the device in the rack.
Page 19
Mounting Device
Installing the Device
Hide quick links:
Advertisement
Table of Contents
