2.
Shutdown — Drops packet that meet the ACL criteria, and disables the port to which the packet was
addressed. Ports are reactivated from the Interface Configuration Page Default. For more information on
reactivating ports, see Configuring Ports.Click
Figure 90: ADD MAC Based ACL Page
In addition to the fields in the ADD MAC Based ACL Page contains the following additional fields:
–
New ACE Priority — Defines the new ACE priority, which determines which ACE is matched to a packet
on a first-match basis. The possible field values are 1-2147483647.
3.
Define the ACL Name, New Priority, Protocol, Source MAC Address, Destination MAC Address, Wildcard
Masks, VLAN ID, CoS, CoS Mask, Ether Type and Action fields.
4.
Click
. The IP based protocol is defined, and the device is updated.
To modify a MAC based ACL:
1.
Click Security > Network Security > Access Control > IP Based ACL. The MAC Based ACL Page opens.
2.
Select an ACL.
3.
Click
. The MAC Based ACL Page opens:
. The Add MAC Based ACL Page opens:
Page 148
Configuring Device Security
Configuring Network Security