Note
The following screen is an example configuration.Items such as addresses, versions, and dates may differ
for each device.
Preparing to decompress...
Decompressing SW from image-1
638000
OK
Running from RAM...
*********************************************************************
*** Running SW Ver. x.x.x.x Date 11-Jan-200x Time 15:43:13 ***
*********************************************************************
HW version is
Base Mac address is: 00:00:b0:24:11:80
Dram size is: xxM bytes
Dram first block size is: 47104K bytes
Dram first PTR is: 0x1200000
Flash size is: xM
Devices on SMI BUS:
-------------------
smi dev id = 16, dev type=0xd0411ab, dev revision=0x1
Device configuration:
Prestera based - Back-to-back system
Slot 1 - DB-DX240-24G HW Rev. xx.xx
Tapi Version: xx.x.x-x
Core Version: xx.x.x-x
01-Jan-200x 01:01:22 %INIT-I-InitCompleted: Initialization task is completed
Console> 01-Jan-200x 01:01:23 %LINK-I-Up: 1
01-Jan-200x 01:01:23 %LINK-W-Down: 2
01-Jan-200x 01:01:23 %LINK-I-Up:
01-Jan-200x 01:01:23 %LINK-W-Down: 4
.
.
.
01-Jan-200x 01:01:23 %LINK-W-Down: 46
01-Jan-200x 01:01:23 %LINK-W-Down: 47
01-Jan-200x 01:01:23 %LINK-W-Down: 48
Vlan 1
Page 25
Initial Configuration
Need help?
Do you have a question about the Web Smart DES-3252P and is the answer not in the manual?
Questions and answers