Defining Multicast Forward All Settings - D-Link DES-3010FA Web User Manual

Layer 2 switch, managed 8 port 10/100base-tx with gigabit & fiber uplinks
Hide thumbs Also See for DES-3010FA:
Table of Contents

Advertisement

Defining Multicast Forward All Settings

The Bridge Multicast Forward All page contains fields for attaching ports or LAGs to a device that is attached to a
neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are forwarded to the
appropriate port or VLAN. Unless LAGs are defined, only a Multicast Forward All table displays. To define Multi-
cast forward all settings:
1.
Click Advanced Setup > Multicast Support > Bridge Multicast > Multicast Forward All. The Multicast
Forward All Page opens:
Figure 99: Multicast Forward All Page
The Multicast Forward All Page contains the following fields:
VLAN ID — DIsplays the VLAN for which Multicast parameters are displayed.
Ports — Ports that can be added to a Multicast service.
The following table summarizes the Multicast settings which can be assigned to ports in the Multicast Forward All
Page.
Table 15:
Bridge Multicast Forward All Router/Port Control Settings Table
Port Control
D e f i n i t i o n
D
Attaches the port to the Multicast router or
switch as a dynamic port.
S
Attaches the port to the Multicast router or
switch as a static port.
Configuring Multicast Forwarding
Page 159
Defining Multicast Bridging Groups

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3010ga3010f - des switch

Table of Contents