Defining Multicast Forward All Settings - D-Link xStack DXS-3250E Web/Installation Manual

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide

Defining Multicast Forward All Settings

The Multicast Forward All Settings Page contains fields for attaching ports or LAGs to a device that is attached to
a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are forwarded to the
appropriate port or VLAN. Unless LAGs are defined, only a Multicast Forward All table displays. To define Multi-
cast forward all settings:
Figure 171:Multicast Forward All Settings Page
The Multicast Forward All Settings Page contains the following fields:
•
VLAN ID — DIsplays the VLAN for which Multicast parameters are displayed
•
Ports/LAG — Ports that can be added to a Multicast service.
5. Select a VLAN in the VLAN ID drop-down box.
6. Define the fields.
7. Click . The Multicast forward all settings are defined, and the device is updated.
Page 248