Archive Download-Sw - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

archive download-sw

Use the archive download-sw privileged EXEC command on the switch stack or on a standalone switch
to download a new image from a TFTP server to the switch or switch stack and to overwrite or keep the
existing image.
Syntax Description /allow-feature-upgrade
/destination-system
stack-member-number
/directory
/force-reload
/imageonly
/leave-old-sw
/no-set-boot
/no-version-check
/only-system-type
system-type
/overwrite
/reload
/safe
OL-21522-02
archive download-sw [/allow-feature-upgrade | /destination-system stack-member-number |
/directory | /force-reload | /imageonly | /leave-old-sw | /no-set-boot | /no-version-check |
/only-system-type system-type | /overwrite | /reload | /safe] source-url1 [source-url2
source-url3 source-url4]
archive download-sw [/allow-feature-upgrade | /destination-system stack-member-number |
/directory | /force-reload | /imageonly | /leave-old-sw | /no-set-boot | /no-version-check |
/only-system-type system-type | /overwrite | /reload | /safe] /directory source-url1
[source-url2 source-url3 source-url4]
Allow installation of software images with different feature sets (for
example, upgrade from the IP base feature set to the IP services features
set).
Specify the specific stack member to be upgraded. The range is 1 to 9.
This keyword is supported only on stacking-capable switches.
Specify a directory for all of the images.
Unconditionally force a system reload after successfully downloading the
software image.
Download only the software image but not the HTML files associated with
the embedded device manager. The HTML files for the existing version are
deleted only if the existing version is being overwritten or removed.
Keep the old software version after a successful download.
Do not alter the setting of the BOOT environment variable to point to the
new software image after it is successfully downloaded.
Download the software image without checking the compatibility of the
stack protocol version on the image and on the switch stack.
This keyword is supported only on stacking-capable switches.
Specify the specific system type to be upgraded. The range is 0 to
FFFFFFFF.
This keyword is supported only on stacking-capable switches.
Overwrite the software image in flash memory with the downloaded one.
Reload the system after successfully downloading the image unless the
configuration has been changed and not been saved.
Keep the current software image; do not delete it to make room for the new
software image before the new image is downloaded. The current image is
deleted after the download.
Catalyst 3750-X and 3560-X Switch Command Reference
archive download-sw
2-11