Cisco Catalyst 3560X-24P Command Reference Manual page 44

archive download-sw
source-url1 [sourceurl2
sourceurl3 sourceurl4]
Defaults The current software image is not overwritten with the downloaded image.
Both the software image and HTML files are downloaded.
The new image is downloaded to the flash: file system.
The BOOT environment variable is changed to point to the new software image on the flash: file system.
Image names are case sensitive; the image file is provided in tar format.
Compatibility of the stack protocol version on the image to be downloaded is checked with the version
on the switch stack.
Command Modes
Privileged EXEC
Catalyst 3750-X and 3560-X Switch Command Reference
2-12
Chapter 2
The source URLs for the software images.
On a standalone switch, enter one source URL for the software image that
the switch supports.
In a switch stack, you can enter source URLs for the software images that
the stack members support as follows:
Up to two source URLs without the /directory keyword.
•
Up to four source URLS with the /directory keyword.
•
The image-name.tar is the software image to download and install on the
switch.
These options are supported:
Local flash file system syntax on the standalone switch or the stack
•
master:
flash:
Local flash file system syntax on a stack member:
flash member number:
The member number can be from 1 to 9.
FTP syntax:
•
ftp:[[//username[:password]@location]/directory]/image-name.tar
HTTP server syntax:
•
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• Secure HTTP server syntax:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
Remote Copy Protocol (RCP) syntax:
•
rcp:[[//username@location]/directory]/image-name.tar
Secure Copy Protocol (SCP) syntax for the:
•
scp:[[//username@location]/directory]/image-name.tar
The syntax for the TFTP:
•
tftp:[[//location]/directory]/image-name.tar
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02