Installation; Pre-Installation Check - Huawei Smart String ESS LUNA2000-215-2S10 User Manual

LUNA2000-(215-2S10, 215-2S12) Smart String ESS
User Manual
Do not open the cabinet door when the humidity is high (relative humidity ≥ 80%
continuously), for example, on rainy days. If you need to open the cabinet door on
rainy days, take protection measures to prevent water from entering the cabinet
as this may result in equipment failure. If the cabinet door is open for 0.5 hour or
longer when the humidity is high, manually perform forced dehumidification.
Otherwise, the equipment may fail or the microgrid may collapse.
Check Scenario on the SmartLogger WebUI. For details, see
User
Perform dehumidification as follows:
1. Check that the auxiliary AC power supply to the ESS is powered on. In off-grid
scenarios, the genset or other external auxiliary power supply is used. In on/off-
grid scenarios, the power grid supplies auxiliary power when available.
2. Log in to the SmartLogger WebUI and choose Monitoring > ESS > Running
Param.
3. Choose Basic Parameters and set Forced dehumidification control to start-
up.
4. Click Submit. After the setting is successful, the manual dehumidification starts.
View the alarm information to check that the system has started forced
dehumidification. The alarm will be automatically cleared after the
dehumidification is complete, which takes more than 10 minutes.

6.1 Pre-installation Check

Take protective measures for working at heights during unpacking.
Issue 01 (2024-07-31)
NO TICE
Manual.
WARNING
Copyright © Huawei Digital Power Technologies Co., Ltd.
6

Installation

SmartLogger3000
6 Installation
73