Huawei Smart String ESS LUNA2000-215-2S10 User Manual page 125

LUNA2000-(215-2S10, 215-2S12) Smart String ESS
User Manual
Table B-1 Paint repair description
Paint
Damage
Slight scratch
(steel base
material not
exposed)
Smudges and
rust that
cannot be
removed
Deep scratch
(primer
damaged,
steel base
material
exposed)
Logo and
pattern
damage
Dent
Procedure
Step 1 Gently polish damaged areas using fine sandpaper to remove smudges or rust.
Issue 01 (2024-07-31)
Tool and Material
Spray paint or paint,
brush (required for
repainting a small
area), fine sandpaper,
anhydrous alcohol,
cotton cloth, and
paint spray gun
(required for
repainting a large
area)
Spray paint or paint,
zinc-rich primer, brush
(required for
repainting a small
area), fine sandpaper,
anhydrous alcohol,
cotton cloth, paint
spray gun (required
for repainting a large
area)
If a logo or pattern is damaged, provide
the logo size and color number. Seek help
from a local supplier of advertisement
coatings to formulate a repair solution
based on the logo size, color, and damage.
1. If a dent is less than or equal to 100
2
mm
depth, fill the dent with Poly-Putty base
and then perform the same operations
as those for processing deep scratches.
2. If a dent is greater than 100 mm
area or greater than 3 mm in depth, ask
the local supplier for an appropriate
repainting solution.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Procedure
Steps 1, 2, 4, and
5
Steps 1, 2, 3, 4,
and 5
in area and less than 3 mm in
B How Do I Repair Paint Damage?
Description
1. For a few
scratches,
smudges, or
rust, manual
paint spraying
or brushing is
recommended.
2. For many
scratches or
large-area
smudges and
rusts, use a
paint spray
gun.
3. The paint
coating should
be thin and
even. Paint
drops are
prohibited on
the coating.
The surface
should be
smooth.
4. Leave the
repainted area
for
approximately
30 minutes
before
performing any
further
2
in
operation.
118