Powering On The Ess; Check Before Power-On; General Check - Huawei Smart String ESS LUNA2000-215-2S10 User Manual

LUNA2000-(215-2S10, 215-2S12) Smart String ESS
User Manual

8.1 Check Before Power-On

8.1.1 General Check

No.
1
2
3
4
5
Issue 01 (2024-07-31)
Check Item Acceptance Criteria
Appearance ● The equipment is intact and free from rust or paint
● The labels on the device are clear. Damaged labels
Cable ● Cable sheathings are properly wrapped and not
appearance
● Cable hoses are intact.
Cable ● Cables are connected in the designed positions.
connection
● Terminals are prepared as required and securely
● Labels on both ends of each cable are clear and
Cable routing ● Electrical and extra low voltage (ELV) cables are
● Cables are neat and tidy.
● Cable tie joints are evenly cut without burrs.
● Cables are placed properly and with slack at bending
● Cables are routed neatly without twists or crossovers
Switch The RCM disconnector is OFF. (Optional. This item
applies only when there is an RCM disconnector.)
Copyright © Huawei Digital Power Technologies Co., Ltd.
8

Powering On the ESS

flake-off. If the paint flakes off, repair the damaged
paint.
must be replaced.
damaged.
connected.
specific, and attached in the same direction.
routed separately.
points to avoid stress.
in the cabinets.
8 Powering On the ESS
102