Huawei Smart String ESS LUNA2000-215-2S10 User Manual page 127

LUNA2000-(215-2S10, 215-2S12) Smart String ESS
User Manual
Figure B-3 Repainting a damaged area
Step 5 Wait for 30 minutes and check whether the painting meets the requirements.
----End
Paint Supply Information
Table B-2 Paint requirements
Item
Primer thickness
Intermediate coat thickness
Top coat thickness
Primer type
Intermediate coat type
Color number of the top coat
Issue 01 (2024-07-31)
NO TE
● The color of the repainted area must be consistent with that of the surrounding area.
Use a colorimeter to measure the color difference, which should be less than or equal to
3 (ΔE ≤ 3). If a colorimeter is unavailable, ensure that there is no visible edge between
the repainted area and the surrounding area. The paint should be free of bulges,
scratches, flaking, or cracks.
● If you choose to spray paint, it is recommended that you spray paint three times before
checking the result. If the color does not meet the requirements, paint more times until
the painting meets the requirements.
NO TE
The following is a paint model list provided by the Company. The list may be updated from
time to time and is for reference only. The cost of paint and technical services is subject to
the local pricing standards.
Copyright © Huawei Digital Power Technologies Co., Ltd.
B How Do I Repair Paint Damage?
Requirement
60 μm
120 μm
60 μm
Epoxy zinc-rich paint
Zinc-rich paint
Obtain the color number based on the
color palette delivered with the
product.
120