Connect To The Stortrends® Appliance; Step One: Power Your System On; Step Two: Get The Ip Address; Step Three: Connecting To The Stortrends® Storage Appliance From Another System - American Megatrends StorTrends 1300 User Manual

Connect to the StorTrends® Appliance

Step One: Power your system on

Power on your server by pressing the power button on the front of your server.

Step Two: Get the IP address

Once the StorTrends® Storage Appliance is fully operational, you will see the following
screen. Write down the IP Address listed in the "Ip Address" field. If you have both NICs
connected to your network, there will be two IP Addresses.
Once again, WRITE DOWN the IP Address listed in the "Ip Address" field. Go to
ANOTHER COMPUTER on the same network to continue with the installation.
Step Three: Connecting to the StorTrends® Storage Appliance from
another system
Type the IP Address of the StorTrends® Storage Appliance that you just wrote down into
your Internet Browser.
18 StorTrends® 1300 User's Guide (StorTrends iTX version 2.7)
STOP!