Table of Contents
Advertisement
Control Panel : Network Settings : File Protocols Settings Page : Set Network File System (NFS)
Protocol Page
To access the Set Network File System (NFS) Protocol page, click the NFS link.
Field/Item
Enable Set Network File
System (NFS) Protocol
Allow All IP Addresses
Allow Following IP
Addresses Only
Allow Following IP
Addresses Only field
IP Address
Add New button
IP Address List
Modify button
Remove button
Apply button
Restore button
Description
Left click this box to enable NFS.
Left click this option to allow all IP addresses access to the Storage Appliance's NAS
partition.
You can click this option to allow only the IP addresses listed to access the Storage
Appliance.
This field contains the list of the IP addresses that have access to the Storage
Appliance shares and folders.
Type an IP Address that you want to give Storage Appliance access to.
This button adds the IP Address that you have typed.
Highlight a listed IP Address that you want to modify or remove from the Storage
Appliance access list.
This button allows you to modify the address.
This button allows you to remove the address.
To save changes, left click the Apply button.
Left click this button to reload latest saved settings.
Chapter Seven : Managing the Storage Appliance 113
Advertisement
Table of Contents
