Step Two: Create a New Storage Pool
Select Create new storage pool and then click Next.
The screen capture above is from a 3U unit. By default, the 1U units do not display this
screen because the 1U units do not use hardware RAID. The 1U units only support
RAID 0, RAID 1, RAID 5 and RAID 1n. However, if you install a hardware RAID
controller, this screen will display. Keep in mind that your hardware RAID controller
may not be fully supported.
30
StorTrends® 1300 User's Guide (StorTrends iTX version 2.7)
Note: