Table of Contents
Advertisement
Reinstalling the Chassis Covers
To maintain proper system cooling and airflow, do not operate the system without installing all
chassis covers back to the chassis. To reinstall the chassis covers, please follow the steps listed
below:
1. Make sure that all components and devices are securely fastened on the chassis and there are
no loose parts/screws inside the chassis.
2. Make sure that all cables are properly connected to the connectors and ports.
3. Place the cover back on the chassis.
4. Slide the cover forward towards the front of the chassis until it snaps into place.
Before Installing the Chassis into a Rack
1. Make sure that the rack is securely anchored onto an unmovable surface or structure before
installing the chassis into the rack.
2. Unplug the power cord(s) of the rack before installing the chassis into the rack.
3. Make sure that the system is adequately supported. Make sure that all the components are
securely fastened to the chassis to prevent components falling off from the chassis.
4. Be sure to install an AC Power Disconnect for the entire rack assembly and this Power
Disconnect must be clearly marked.
5. The rack assembly shall be properly grounded to avoid electric shock.
6. The rack assembly must provide sufficient airflow to the chassis for proper cooling.
Chapter Four : Safety Information and Technical Specifications
51
Advertisement
Table of Contents
