Control Panel : Network Settings : Firewall Settings Page - American Megatrends StorTrends 1300 User Manual

Control Panel : Network Settings : Firewall Settings Page

The Firewall Settings page allows you to configure the IP access parameters of the
Storage Appliance. On the Firewall Settings: Blocked/Trusted Sites page, you can enter
IP addresses to block or allow. You can also specify which ports and protocol to block or
allow.
By default the Blocked Sites page is displayed. If it is not, left click the Blocked Sites link
to enter a range of IP addresses that you want to block.
Field/Item Description
Start IP Address This field allows you to enter the start address of the subnet you want to either block or
always allow.
Subnet Mask This field allows you to enter the specific subnet of the IP address range that you want to
use.
Protocol This drop down box allows you select the ICMP, UDP or TCP protocols. The Storage
Appliance can be configured to accept or ignore packets based on specified type.
Start Port This field allows you to enter the first port of the port range that you want the Storage
Appliance to accept or ignore.
End Port This field allows you to enter the last port of the port range that you want the Storage
Appliance to accept or ignore.
Add button Left click the Add button when you are satisfied with the information entered.
Delete button This button allows you to delete a selected item from the list.
Modify button This button allows you to edit a selected item from the list.
108 StorTrends® 1300 User's Guide (StorTrends iTX version 2.7)