American Megatrends StorTrends 1300 User Manual page 244

Step Description
7 The StorTrends iTX installation takes approximately 30 minutes. You will see various screens
throughout the installation. At times there will be a long period where you will see a blank
screen. However, do not try to do anything. Leave the system alone until the StorTrends iTX
Installation CD ejects and you see the screen where it tells you that the installation is complete.
Press the <ENTER> key to reboot.
StorTrends iTX 2.7
8 Congratulations! You have successfully installed StorTrends iTX on your StorTrends 1300
storage appliance. At this point, you can physically disconnect the external USB CD-ROM
drive.
Proceed to Step Two: Get the IP Address in Chapter One, Storage Appliance Configuration to
configure your Storage appliance.
226 StorTrends® 1300 User's Guide (StorTrends iTX version 2.7)
Complete
Congratulations, your AMI StorTrends installation is complete.
Remove any media used during the installation process and press
<Enter> to reboot your system.
Reboot
<Enter> to reboot
STOP!