Floppy, IDE and SATA Drive Connections
Note the following when connecting the floppy and hard disk drive cables:
•
The floppy disk drive cable has seven twisted wires.
•
A red mark on a wire typically designates the location of pin 1.
•
A single floppy disk drive ribbon cable has 34 wires and two connectors to provide for two
floppy disk drives. The connector with twisted wires always connects to drive A, and the
connector that does not have twisted wires always connects to drive B.
Floppy Connector
The floppy connector is designated Floppy.
IDE Connector
There are no jumpers to configure the onboard IDE#1 connector.
SATA Ports
Onboard SATA ports.
74
StorTrends® 1300 User's Guide (StorTrends iTX version 2.7)