Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table on the right
for pin definitions.
Power Fail LED
Pin Definitions (JF1)
Pin #
5
6
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to the hardware reset
switch on the computer case. Refer to the table on the right for pin definitions.
Reset Button
Pin Definitions (JF1)
Pin #
3
4
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins
will power on/off the system. This button can also be configured to function as a suspend button.
To turn off the power when set to suspend mode, depress the button for at least 4 seconds. Refer to
the table on the right for pin definitions.
Power Button
Pin Definitions (JF1)
Pin #
1
2
Universal Serial Bus (USB0/1)
Two Universal Serial Bus ports are located on the I/O backplane. USB0 is the bottom connector
and USB1 is the top connector.
Universal Serial Bus
Pin Definitions (USB0/1)
USB0
Pin #
1
2
3
4
5
68
StorTrends® 1300 User's Guide (StorTrends iTX version 2.7)
Definition
VCC
Ground
Definitions
Reset
Ground
Definition
PW_ON
Ground
USB1
Definition
Pin #
Definition
+5V
1
+5V
PO-
2
PO-
PO+
3
PO+
Ground
4
Ground
N/A
5
Key