Step
Description
2
Select the Target that you want to log on to. Notice that the Status of the Target is Inactive. Left click
the Log On button.
Note:
3
You are prompted with the Log On to Target dialogue box. Left click the OK button to proceed.
If the Target does not appear in the list, try the following:
•
Check to verify that you added the iSNS server in the iSNS Servers tab.
This is necessary if you are using the iSNS Zoning security feature on your
Storage Appliance.
•
If Zoning is not being used make sure that you have added the Target
Portal in the Target Portals tab.
Chapter Seven : Managing the Storage Appliance 151