Control Panel : Network Settings : Network Statistics Page : Receiving Details
Field/Item
Description
Total Packets
This field reports the number of packets received for the NIC selected.
Received
Total Bytes Received
This field reports the number of Bytes received for the NIC selected.
Multicast
Multicast counts the number of times that a transmit encountered more than one collision
but less than 16. The value only increments if transmits are enabled and the Ethernet
controller is in half-duplex mode.
Bad Packets Received
This field reports the number of bad packets received. In other words, a bad frame that was
marked as an error by PHY.
Control Panel : Network Settings : Network Statistics Page : Transmission Details
Field/Item
Description
Total Packets
This field reports the number of packets sent for the NIC selected.
Transmitted
Total Bytes
This field reports the number of Bytes sent for the NIC selected.
Transmitted
Collision
This field reports the number of packet collisions that occurred during transmissions.
Valid in half-duplex mode.
Transmission Errors
This field reports the number of ECOLs or Excessive Collisions Counts. Valid in half-
duplex mode.
Chapter Seven : Managing the Storage Appliance
99