Table of Contents
Advertisement
Set the RAID Levels
Select the RAID Level, Capacity, Cache Option type, Stripe Size and Spare type (if
applicable).
The screen capture above is from a 3U unit. The 1U units only support RAID 0, RAID 1,
RAID 5 and RAID 1n. However, if you install a hardware RAID controller, more RAID
levels are displayed. Keep in mind that your hardware RAID controller may not be fully
supported.
Type in your Storage Pool's name
Type in a Storage Pool Name.
The Storage Pool Name must be alphanumeric, not have any spaces and be between one
and 63 characters in length.
If you are planning to use the snap-assisted replication feature, uppercase characters
should be avoided in container and volume names as well.
Click the Next button to continue.
You will be prompted to wait while it configures the box. Do not close the window or
click anywhere else.
32
StorTrends® 1300 User's Guide (StorTrends iTX version 2.7)
Note:
Note:
Advertisement
Table of Contents
