Adjusting Remote - Invacare Modulite User Manual

Modulite
When adapting the seating system and the seat functions to
the user:
— Beware of pinch points when adjusting the power
wheelchair components and
— ensure that no power wheelchair components collide.
NOTICE!
The power wheelchair is manufactured and configured
individually to the specifications of the order. The
assessment must be performed by a healthcare professional
according to the user´s requirements and health conditions.
— Consult a healthcare professional if you intend to adapt
the power wheelchair configuration.
— Any adaption should be performed by a qualified
technican.
Initial setup should always be done by a healthcare
professional. Adjustment by the user is only recommended
after they have been given appropriate guidance by the
healthcare professional.
Electrical Adjustment Options
Refer to the user manual for your remote for more information
on operating electrical adjustment options.
Footplates
All footplates offered by Invacare can be folded upwards.
12
3.2 Adjusting Remote
CAUTION!
Risk of the remote being pushed backwards during
an accidental collision with an obstacle, such as a
doorframe or table, and the joystick being jammed
against the armpad if the position of the remote is
adjusted and all screws are not completely tightened
This will cause the power wheelchair to drive forward
uncontrollably and potentially injure the power wheelchair
user and any person standing in the way.
— When adjusting the position of the remote, always make
sure to tighten all screws securely.
— If this should accidentally happen, immediately switch
the power wheelchair electronics OFF at the remote.
CAUTION!
Risk of Injury
When leaning on the remote, for example, when
transferring into or out of the wheelchair, the remote holder
may break and the user may fall out of the chair.
— Never lean on the remote as a support for, for example,
transfer.
1656515-G