Adjusting The Remote For The Length Of The User's; Arm; Adjusting The Height Of The Remote (Only For Swing-Away Remote Supports); Swivelling The Remote To The Side - Invacare Pronto M41 Series User Manual

Invacare® Pronto™ M41 Series with SureStep®

5.2.1 Adjusting the remote for the length of the user's

arm

1. Loosen wing bolt A.
2. Shift the remote forwards or backwards to the desired
distance.
3. Retighten the bolt.
5.2.2 Adjusting the height of the remote (only for
swing–away remote supports)
• 6 mm Allen key
1. Loosen Allen screw A.
2. Adjust remote to desired height.
3. Re-tighten Allen screw.
30

5.2.3 Swivelling the remote to the side

If your mobility device is fitted with a swing-away remote
holder, then the remote can be moved away to the side, for
example, to drive up close to a table.

5.3 Adjusting Chin Control

CAUTION!
Risk of Injury and Damage
Remaining burrs and missing end caps after
modifications on rods, such as shortened rod, can
lead to injury or damage.
– Deburr cut after cutting excessive length.
– Re-install end cap after deburring.
1553378-G