Outline of Key Operations
2-2
Outline of Key Operations
Mode: RUN
Display selection
Note 1. Refer to 2-5-1 RUN Mode Displays for details.
2. Refer to 2-5-3 FUN Mode Displays for function details.
3. The DOWN Key is also used to input the reference incident level set-
ting when a Through-beam Sensor Head is used.
See note 1.
Timing input
Reset input
See note 3.
Zero reset
Mode: FUN
Function selection
Function setting
See note 2.
Function/numeric
value confirmation
Mode: T
Threshold value
Manual setting
Digit position
Numeric value
Threshold value
confirmation/Teaching
See note 2.
Section 2-2
21