Lifting The Product - Danfoss iC7 Series Design Manual

Design Guide | iC7 Series Air-cooled System Modules
Table 5: Weights of the System Modules (continued)
Frame No
integratio
n unit [kg
(lb)]
AR10 –
AR11 –
LCL Filter, –
size 10
LCL Filter, –
size 11
1) The symbol – in this table means that the value is not applicable.

Lifting the Product

4.6
The weights of system modules and different frames are different. It can be necessary to use a lifting device to move the drive from its
package. For lifting the product, follow these instructions.
1.
Remove the system module from the pallet where it was bolted to.
2.
Use a lifting device that is sufficiently strong for the weight of the system module or filter.
3.
Put the lifting hooks in the lifting loop or lifting hole on top of the product.
Danfoss Drives Oy © 2024.03
Short Short Standard
integratio integratio integratio
n unit n unit n unit
without with CM without
filter, filter, filter,
+AE01 [kg +AEC1 +AE10 [kg
(lb)] [kg (lb)] (lb)]
72 – 78
(158.7) (172.0)
82 – 88
(180.8) (194.0)
– – –
– – –
Standard Standard Standard
integratio integratio integratio
n unit n unit n unit
with dU/ with dU/ with CM
dt Filter, dt and filter,
+AEU1 CM filter, +AEC2
[kg (lb)] +AEU2 [kg (lb)]
[kg (lb)]
– – –
– – –
– – –
– – –
AJ389643111587en-000101 / 172F6361A |
IP00 [kg IP00 with
(lb)] an IP54
cooling
channel
[kg (lb)]
– –
– –
221 251
(487.2) (553.4)
290 349
(639.3) (769.4)
17