Using Scada Software; Creating Scada Software And Rs View Tag Files - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Using SCADA Software

3-4

Using SCADA Software

3-4-1 Creating SCADA Software and RS View Tag Files

1, 2, 3...
Tag Files for NS-series PTs
1, 2, 3...
The following procedures are required to create tag files for SCADA software or
the RS View.
1. For Loop Control Units, register Send All Blocks (462) and Receive All
Blocks (461) (and if required, Expanded CPU Unit Terminal or CPU Unit Ter-
minal function blocks).
For LCBjj, set ITEMS related to the HMI functions in the System Com-
mon Block (000) (and register tags for user link tables as required).
2. Set CSV tags for each function block.
Note CX-Process Tool version 3.1 or higher supports automatic registra-
tion of CSV tags when function blocks are registered. The tag can
also be edited in Excel or other software and then read into the proj-
ect.
3. Compiling the CSV tag files.
The tag file for SCADA software (default: taglist.csv) and the tag file for RS View
(user_set_file_name.csv) are used differently, as described next.
1. Create the tag file for SCADA software (using Execute – Create Tag File –
CSV Tag).
2. Import the file into the NS Face Plate Auto Builder.
Note CX-Process Tool version 4.0 or higher supports creating tag files for
SCADA software (compiling CSV tags) and starting the NS Face
Plate Auto Builder in one operation (using Execute – Create Tag File
– Start NSFP).
Section 3-4
141