Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 147

Creating Function Block
Inserting Comments
(Annotations)
120
As shown below, the I/O memory address (here, DM00000) in the CPU Unit
that corresponds to the selected tag will be displayed.
To change the display to the tag name, right-click and select Display Mode/
CSV Tag Mode from the pop-up menu. A checkmark will be added to the
menu and the tag name will be displayed instead of the I/O memory ad-
dress.
4. Create software connections, just as for other function blocks.
In the following example, tag name host01 in the user link table has been set
as the RSP for a Basic PID function block.
With CX-Process Tool versions 2.50 and higher, it is possible to insert annota-
tions (user-defined text) into block diagrams in Edit Block Diagram Mode. Up to
16 annotations can be inserted in one block diagram and up to 3,000 annota-
tions can be inserted in one function block file. Each annotation can be up to 200
characters long.
This function allows user-set labels (such as "Tank 1 Temp. Control" or "Tank
Temp.") to be inserted and displayed in function blocks or I/O wiring. The dia-
Section 3-1