Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 306

Operation Check
Stopping Operation of
Function Blocks with
Contact ITEMs
280
4. Click the Execute Button. (Example: As shown blow, "1" will appear under
contact 001-026.)
Note The following dialog box will appear if the transmission fails.
Note Not only the contact ITEMs used in the step ladder program, but also the contact
ITEMs in function blocks and other contact ITEMs can be reset through the
Execute Dialog Box.
Click the Stop Block Operation Button to stop the operation of the function
block displayed in the block address (the basic PID in block address 001 in the
following case).
Section
Set to 1.
4-6