Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 197

User Link Tables
1, 2, 3...
User Link Table Edit Menu
170
3. Open the ITEM List Window for the field terminal, right-click the ITEM List
Window, and select Extension. (An error will occur if no lines are connected
to the function block.)
4. The Extension Setting Dialog Box will be displayed.
5. Make the setting by specifying the channel number to be set.
6. To make the same settings for all channels, click the Set to all channel But-
ton. For example, if channels 1, 2, and 4 already have connection lines com-
pleted, the same settings will be reflected in channels 1, 2, and 4 if the button
is clicked. The settings will not be reflected in channel 3, for which connec-
tion lines have not been completed.
Only the entry for the relevant user link table can be displayed in the User Link
Table Window using the following procedure if extension settings are made from
the field terminals.
1. Select the field terminal to be displayed from the Workspace tree.
2. Right-click and select Find – User Link Table.
3. The relevant user link table for the selected field terminal will be displayed.
When the User Link Table Window is displayed, right-click and select Speci-
fied as Field Terminal.
Right-click at the top of the User Link Table to display the editing menu described
in the following table.
Section 3-5