Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 294

Monitor Run Status
268
Example: Block address 002 with an execution error 1 (source/destination
designation error) while registering block addresses 000, 001, 002, and
100.
Execution error code: 0 (Normal)
If the block address has a RAM checksum error in the function block data-
base, one of the following values will be displayed in the block address with
the vertical row specifying the 10's digit in the block address and the horizon-
tal row specifying the 1's digit in the block address.
–1: Block address not used
0: Normal (no function block database error)
90: Database error in the function block (See note.)
Note For a database error in all the function blocks, the value will be indefi-
nite.
Example: No database error while registering block addresses 000, 001,
002, and 100.
0: Normal (with no database error in function block)
Execution error code: 1
(Source/Destination designation error)
Block address not used: –1
Block address not used: –1
Section 4-5