Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 114

Overview of User Interface
Pop-up menu command
Filter Analog/ g/
Contact C
Read/Write
Memory
Area ea
Field Terminal
Field Terminal Block
CSV Tag
No Connection
All Entries
Connection Map
Print
Analog Displays analog signal tags.
Contact Displays contact signal tags.
Both Displays both analog and contact signal
tags.
Read Displays tags that read from the CPU Unit
(from to the Loop Controller.
LCB)
Write (to Displays tags that write from the Loop
LCB) Controller to the CPU Unit.
Read/ Displays tags that both read and write.
Write
CIO Displays tags allocated in the CIO Area of
the CPU Unit.
W Displays tags allocated in the Work Area of
the CPU Unit.
H Displays tags allocated in the Holding Area
of the CPU Unit.
DM Displays tags allocated in the DM Area of
the CPU Unit.
EM Displays tags allocated in the EM Area of
the CPU Unit.
All Displays tags allocated in all of the areas
in the CPU Unit.
Displays tags for field terminals.
Selected if a filter display is used for a user
link table containing expansion settings.
Displays entries for CX-Process Monitor
Plus.
Turns OFF the display of all tags.
Displays all tags.
Displays detailed information on the
software links between two function
blocks.
Prints the user link table.
Description
Section
Conditions for selection
---
---
---
---
---
---
---
---
When a line of tag data is selected
---
2-2
87