Monitor Run Status; Monitoring The System Run Status - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Monitor Run Status

4-5

Monitor Run Status

4-5-1 Monitoring the System Run Status

Monitor Run Status
266
It is possible to monitor or control the status of System Common Block of the
Loop Controller. The following items can be monitored or controlled. This func-
tion is mainly used for checking the load rate or execution errors.
Monitor items: Present load rate, maximum load rate, operation cycle au-
Control items: Maximum load rate and resetting operation cycle automat-
Loop Controller
Note Do not apply function block data to practical use unless the suitability of the data
for the system is fully checked with the CX-Process Tool, including a check on
the load rate by selecting Operation and Monitor Run Status from the Execute
Menu. For details on the load rate, refer to the operation manual for the Loop
Controller.
Take the following steps to monitor the run status of System Common Block of
the Loop Controller.
Select Operation and Monitor Run Status from the Execute Menu. The follow-
ing dialog box will appear.
The ITEMs and data displayed on the Monitor Run Status Dialog Box is from the
System Common block (block model 000). For details, refer to the list of ITEMs
for the System Common block in the Function Block Reference Manual.
tomatic change flag, minimum block address with an
execution error, execution error code of each block ad-
dress, block address with a database error, battery error,
and ITEM data for System Common Block.
ic change flag.
Monitoring load rate Resetting operation
and execution errors cycle automatic
change flag
System
Common
Block
Section
CX-Process Tool
4-5