Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 104

Overview of User Interface
Menu Submenu/
Command
Settings, PLC Info
continued
Execution Create
Tag File
Show Tag
List
Check
Tag Error T E
Create Creates I/O tables in the CPU Unit from the CX-Process
I/O Table Tool.
(applica-
ble only
when CX-
Server is
used as
the com-
munica-
tions driv-
er)
PLC Set- Makes settings in the PLC Setup in the CPU Unit from the
up (appli- CX-Process Tool.
cable
only
when CX-
Server is
used as
the com-
munica-
tions driv-
er)
Monitor Creates a file for the CX-Process Monitor.
Tag (Loop (The CX-Process Monitor must be installed in advance.)
Control
Unit only)
CSV Tag Creates a CSV tag file based on CSV tag settings and
settings in the Send/Receive All Blocks blocks (Block
Model 462/461).
RS View Creates a tag file for the RS View.
Tag
Monitor Creates a file for the CX-Process Monitor Plus.
Plus Tag
Create Outputs the HMI memory allocations to a CSV file (shows
HMI I/F the address in the EM Area allocated to each tag and tag
Memory ITEM).
Map
Start Starts the Faceplate Auto-Builder for NS after CSV tags
NSFP are compiled.
Monitor Displays information (tag names, data exchange function
Tag (Loop blocks, etc.) for the CX-Process Monitor tags that have
Control been set.
Unit only)
CSV Tag Displays tag information set for SCADA software
(including the tag names, block addresses, function block
names, scaling, units, etc.)
Monitor Displays information (tag names, data exchange function
Plus Tag blocks, etc.) for the CX-Process Monitor Plus tags that
have been set.
CSV Tag Checks a compiled CSV tag file for errors.
Monitor Checks a compiled Monitor Plus tag file for errors.
Plus Tag
Description
Section 2-2
Conditions for
selection
---
---
---
---
---
---
---
---
When an LCU
element, function
block file, or Project
Workspace is
selected
When an LCU/LCB
element, function
block file, or Project
Workspace is
selected
When an LCU/LCB
element, function
block file, or Project
Workspace is
selected
---
---
77