Using Cx-Server - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Initial Settings for Online Connections

4-2-3 Using CX-Server

Serial Connections
Initial Settings
Initial Settings in
CX-Process Tool
1, 2, 3...
248
Click the Start Button on the right side of the window to perform the same
operations that are performed in serial initialization. The Serial Unit will start
(CPU_UNIT is always started) as shown in the following diagram.
The FinsGateway Settings Window can be used to check whether or not on-
line communications were properly established by the serial initialization
operations.
When CX-Server is selected as the communications driver and the initial set-
tings described below have been made, the online connection is established au-
tomatically when online operations such as downloading are executed. (There
is no need for operations like the FinsGateway "serial initialization" operations.)
The unit number setting procedure is the same as the procedure for the Fins-
Gateway.
After setting the unit number, take the following steps in the CX-Process Tool.
1. Select Change PLC from the Settings Menu.
2. The Change PLC Dialog Box will be displayed.
Select SYSMAC WAY (Host Link) as the network type.
Section 4-2