Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 128

Creating Function Block
CX-Programmer PLC type setting
PLC type CPU Unit model
CJ1G-H CPU42
CPU43/44/45
CS1G-H, CS1H-H ,
CPUjj
CS1H-H CPU65/67
CS1G-H, CS1H-H, CPUjj
CS1G, CS1H
Example: Right-click the Loop Control Board (e.g., CS1W-LCB05).
Name in Unit Selection Dialog
Box in I/O Table Window B i I/O T bl Wi d
Loop Controller p
jj
2. CX-Process Tool will start and at the same time, the Function Block File for
the node will be inserted (Settings – Insert – Insert Node). At this time, the
following dialog box will be displayed.
The Number-Model setting (e.g., 00-LCB05) will be automatically selected,
based on the Loop Control Board/Unit model in the original I/O Table Win-
dow.
g
CJ1W-LCB01 (Loop Control Board)
CJ1W-LCB03 (Loop Control Board)
CS1W-LCB01 (Loop Control Board)
CS1W-LCB05 (Loop Control Board)
CS1D-LCB05D (Loop Control Board)
CS1W-LC001 (Loop Control Unit)
Select Start Special Application.
Select Start with Settings Inherited.
Section
Loop Control Board or Loop p
Control Unit C l U i
3-1
p
101